There are problems with electronic factories:
1. The sultry work environment reduces the efficiency of employees’ work, affecting the overall production progress and product quality of the enterprise.
2. With the development of society, the new generation of migrant workers have become higher in the working environment in the post -80s and 90s. The workshop is too hot, the working environment is too poor, and the new employees are unwilling to come in.
3. The workshop area is large, the personnel are dense, and the air does not circulate, resulting in high temperature in the workshop and poor working status of employees.

The poor environment of the electronic factory has impact on the enterprise:
Because the staff of the electronic factory is dense and the assembly line is the flow line, the whole workshop is extremely stuffy in the summer. By May and June, the temperature of the workshop reached 38 degrees. Every day there are many employees to find various reasons to ask for leave or not to go to work, or simply apply for late work and rest during the day. Employees who go to work are breathable and go to the toilet because of the weather hot and moving. Wet, sweaty face, seriously affects production efficiency and the enthusiasm of employees at work.
Electronic factory cooling solution, Guangdong XIKOO recommends XIKOO environmental protection air conditioners:
1. Strong cooling effect: In hot areas, the general cooling of the machine can reach the effect of 4-10 ° C, and the cooling is rapid.
2. The air volume is large, and the air supply is long: the maximum air volume per hour is 18000-60000m³, which can be selected according to customer requirements. Our machine wind pressure is large and the air supply is long.
3. Stable performance and reliable quality: After 100mm, the “5090 evaporation rate network” has a strong cooling capacity. It uses a three -lobe front -cut axial flow blades with low noise and high efficiency.
4. Energy-saving: Install one from 100-150 square meters, only 1 degree of electricity in 1 hour.
5. Power saving: Energy consumption is only 1/8 of the traditional air conditioner, and the investment is only 1/5 of the central air conditioner.
6. It can be used without environmental restrictions and open fire semi -open workshops.
Electronic factory cooling solution:
1. Overall cooling solutions for the workshop that are more personnel and decentralized:
The work positions of the electronic workshop are mostly in the form of a “pipeline”. The entire workshop has a large area and a large number of personnel, which leads to turbidity and sweltering air in the workshop. In order to achieve good ventilation and cooling effect, the overall cooling scheme can be selected. XIKOO environmental protection air conditioner commonly used Model RDF-18A is used in densely personnel high-temperature workshops, and the use area is 100 square meters. If the workshop area is large, it can also be used in combination.
2. Take a job air supply solution for the workshop that is less personnel and concentrated:
In the case of large workshop area and fewer staff, generally use the designated local cooling to cool down, and only cool down the area of the personnel. Control in the most reasonable range.
Effect after installation:
After we have carefully designed the solution workshop, there is no odor, fresh air, extremely cool, and no loss of people. A good production environment also helps companies recruit more outstanding talents.