Water air cooler not only has a good cooling effect, cool down instantly is also its most popular feature. we can enjoy a cool breeze effect of about 27 degrees after starting up the air cooler machine and running for one minute, which is really comfortable and cool. Therefore, especially for production and processing factory workshop like to install industrial air cooler for cooling. At present, if you want to use the most energy-saving and cost-effective method to do cooling projects, the installation of environmentally friendly air-conditioning equipment is the most popular and most widely used plant cooling solution.

Environmentally friendly air conditioners are also known as industrial air coolers and evaporative air conditioners. It uses the principle of water evaporation to cool down. It is an energy-saving and environmentally friendly air conditioner without refrigerant, compressor and copper tube. The core component is cooling pad. when the air cooler is turned on, negative pressure will be generated in the cavity, attracting hot air from the outside to pass through the cooling pad to reduce the temperature and become cool fresh air blown out from the air outlet of the air conditioner. so that the indoor cold air forms a positive pressure and the indoor air with high temperature, sultry, peculiar smell and turbidity is discharged to the outside, so as to achieve ventilation. The purpose of ventilation, cooling, deodorization, reducing the damage of toxic and harmful gases and increasing the oxygen content of the air. especially for the open space, you can enjoy the cool air from the environmentally friendly air conditioner after running for one minute.

Although the traditional compressor air conditioner can achieve constant temperature and humidity, it needs to run for a period of time in advance to allow the cold air to circulate. The compressor compresses the gaseous Freon into high temperature and high pressure gaseous Freon, and then sends it to the condenser ( The outdoor unit) becomes a liquid freon at room temperature and high pressure after dissipating heat, so the outdoor unit blows hot air. The liquid freon enters the evaporator (indoor unit) through the capillary, the space suddenly increases, the pressure decreases, the liquid freon will vaporize and become a gaseous low-temperature freon, thereby absorbing a lot of heat, the evaporator will become cold, The fan of the indoor unit blows the indoor air through the evaporator, so the indoor unit blows cold air; the water vapor in the air will condense into water droplets after encountering the cold evaporator, and flow out along the water pipe, this is the Air conditioner leaks water. Then the gaseous freon returns to the compressor to continue to compress and continue to circulate, so that the humidity of the closed environment can be lowered as a whole, and it takes at least 20 minutes to complete the internal circulation process of the entire indoor environment to reach an ideal state.