1. The installation location of the air cooler host is far away from fire sources, garbage dumps, smoke and dust exhaust outlets, etc., which affect the safety of the use of air cooler and the air quality of the air outlet, to ensure that the environmentally friendly air conditioning equipment can continuously and continuously deliver clean and cool fresh cold air to the workshop.

2. At the installation location, ensure that the mounting bracket can support the weight of the entire host and air supply ducts as well as the maintenance personnel to ensure the safety of future after-sales work.

3. After determining the installation method and location, it is necessary to measure the size of the host installation location and determine whether the air duct enters the room through the wall or through the window. If the indoor design position needs to arrange ventilation ducts when supplying air, attention should be paid to whether there are obstacles at a height of 2.5m from the ground, whether the ventilation ducts and air duct hangers can be arranged smoothly, etc.

4. Before installing the evaporative air cooler bracket, the horizontal line should be measured first. The installation bracket should be kept horizontal and cannot be tilted. The distance between the fuselage and the wall is 280-330mm. (Depending on the site), the indoor controller is not less than 1.5m from the ground

5. Air cooler use positive pressure discharge to discharge indoor hot air to the outside to form air convection, so there must be enough exhaust ports in the room, and the ratio of air inlet to exhaust port should be at least 1:1; if there is heating equipment in the room and there is no exhaust port, it is recommended to open enough exhaust ports at a height of more than 3 meters or install a negative pressure fan to extract the indoor hot air to achieve the effect of ventilation and cooling.

The above suggestions are the core installation points summarized by the master craftsman with more than ten years of installation and execution experience. As long as you carefully understand and grasp these points, the quality of the air cooler project will definitely not be bad, and the cooling effect will definitely be impeccable. Various engineering quality problems that often occur in the industry, such as leakage, fire, falling, rust, odor, etc., will never occur. Customers can buy and use with peace of mind, and the goal of win-win cooperation can be achieved.