Due to the characteristics of its production, the high temperature problem of the injection workshop is even more prominent. In the work, the injection molding machine emits high heat in the work and continuously spreads to the factory workshop. If the ventilation conditions in the injection workshop are poor, these thermal gathering gatherings generate high temperature with high temperatures above 36 degrees, especially in the hot summer. Employees are like this in this way. The work of high -temperature sultry injection molding workplace is often sweating, the labor intensity increases, the physical consumption is too fast, the work efficiency is low, and the employee’s high temperature and sultry situation of the high temperature of the injection molding workplace is high.

So how to do the ventilation and cooling of the injection molding workshop, the following will design a few ventilation and cooling solutions for everyone:

First, open doors and windows to strengthen natural ventilation.

In the construction construction, the injection molding workshop should fully consider the ventilation and ventilation problem in the workshop. There must be a certain space in the building height of the workshop. In more than 4 meters, if you rent a plant, you must also choose the first -floor workshop with a space height of more than 4 meters. , The walls around the workshop should be installed with ventilation air -changing windows to allow the indoor air to circulate naturally as much as possible. If the factory building is the steel structure of the steel structure, the roof is insulated to reduce the impact of the roof sunlight on the workshop. Set off ventilation air ducts. Do not choose a small and closed workshop as an injection molding workshop.

Second, it is to install a negative pressure fan to force ventilation to cool down.

If the natural ventilation ventilation effect does not reach the ideal, it is necessary to install the stars negative pressure fans to force the ventilation and cool down in the injection molding workshop. Near the location of the heat from the injection molding machine, install a certain number of powerful star family negative pressure negative pressure. The fan quickly discharged a lot of heat out of the outdoor, which forced the outdoor air into the workshop for convection exchange, reducing the gathering of heat in the workshop.

Characteristics of XINGKE Vancoules:

1. The overall machine is designed with CAD/CAM, which has the characteristics of low investment, large air volume, low noise, small energy consumption, stable operation, long life, and high efficiency. The shutters will automatically open dust, waterproof, beautiful and generous; Optimal selection of the factory to cool down and ventilate.
2. Green and energy -saving star negative pressure fans and cooling wet curtains will become the mainstream of ventilation and cooling in the plant
3. The air is taken away from the human body heat, the air flow accelerates the evaporation of sweat and absorbs human heat, which makes people feel cool as natural.

With the installation of cooling wet curtain (water curtain) to reduce air temperature:

When the negative pressure fan generates negative pressure and forcibly discharge indoor hot air, install the cooling wet curtain wall across or side of the negative pressure fan of the star family. Purpose.

Third, the cooling of the injection molding workshop with cooling wet curtain cold wind cabinet

Several types of injection molding workshop cooling equipment: evaporate air -conditioning machines, environmental protection air conditioners, energy -saving air -conditioning, wet curtain cold fan, water -cooled air conditioning, water -cooled air cabinet and other equipment to cool down the injection workshop to cool down. Different cooling methods use different devices. At present, it is widely used in industrial cooling fans. The main devices include centrifugal turbine, centrifugal motors, evaporator -type water curtains. Water curtains are used for air evaporation and fan blades rotating positive pressure to transport cooling air cooling. Among them, mobile cooling fans and centrifugal cooling applications are extensive.

Can the wet curtain cold wind cabinet be refrigerated? Can you cool down? How much can you cool down? Many unused customers will ask this question that Xingke cold fan does not actually have a refrigeration function, because it is an environmentally friendly product that does not require compression, refrigerant and copper tube. It is based on water than air and then uses evaporation to make the cooling effect. When it can be used by turning plant fiber paper into water curtains, the problem can be reduced when the air passes through the water curtain. Compared with the refrigeration of large air conditioners, the price is cheaper. Compared with air conditioners, it consumes less power, so it is loved by some factories and people. Compared with ordinary electric fans, his cooling effect is much better, the better the weather, the more obvious the effect. The wet curtain can reduce the temperature and does not need to add ice crystals. He only needs to add water, so the cost is low, the power consumption is small, the economy is environmentally friendly, the effect is good, the cost is low, and the cooling and cold air cabinet of the injection molding workshop can not be more appropriate.