Guangzhou e-commerce park large office cooling project with water cooled air conditioner, the e-commerce park office is on the 3rd floor (not the roof), brick-concrete structure, the total office area is 120 square meters, 60 meters long, 20 meters wide, 3.3 meters high, the office area is densely populated, about 80 people.

The customer said that the office can reach 36℃ indoors during the highest temperature in summer. The previous tenant installed 10 5p ceiling units, but the feedback was that the cooling effect was very poor, so he did not consider installing this. The customer’s office is now being renovated, and he wants a solution with low investment cost, low power consumption, and good cooling effect. It is said that the central air conditioner was designed before, with a total investment of about 25W and a power consumption of about 100KW/H; the traditional air conditioner Midea 20 5P ceiling units were also designed, with a total investment of 18W and a power consumption of 80KW/H; the cost is high and the power consumption is high. Now I want a cooling solution with a lower cost, power consumption ≤50KW/H, and temperature control at 26℃±1℃.

Through communication with the customer, we learned about the situation in the office and his cooling needs. We designed 6 sets of XIKOO industrial energy-saving  water cooled air conditioners SYL-ZL-25 models. Because the host of this industrial energy-saving air conditioner is a vertical floor-standing style, it is placed and installed against the wall. The outdoor unit is installed in the outdoor corridor on the first floor for easy heat dissipation.

The cooling effect of the office completed at the end is that when the outdoor air temperature is 36℃ in summer, the overall indoor temperature of the office can be controlled at 24-26℃, and the main outlet temperature of the industrial energy-saving air conditioner is 13-15℃. When all industrial energy-saving air conditioners are turned on, the actual test power consumption is 20KW/H, which is more than half less than the customer’s required power consumption. When the set temperature is 25℃, the compressor will not work after reaching this temperature and enter the power saving mode. Such energy consumption can achieve such a cooling effect, and the customer is very satisfied.