Existing problems in the food processing plant:
1. Because food processing requires high temperature heating, the temperature in the workshop is higher than the outside in the summer.
2. Food processing union produces fog, which causes the air to be turbid and not circulating
3. Food processing will also produce a lot of smell, especially in summer, mildew will occur

The poor environment of the food processing plant has impact on the enterprise:
Food processing is closely related to our lives. If the food deteriorates due to mildew, the relevant agencies have found that it will affect the credibility of the corporate; because the high temperature, water vapor, and air of food processing plants will seriously affect the efficiency of workers’ work, which will lead to the output of the work, which will lead Stomading in time

Food processing plant cooling solution, recommending Star Kee Environmental Air Conditioning:
1. The heavy air volume and the long-distance air supply: the maximum air volume per hour is 18000-60000m³, which can be selected according to the customer’s requirements. Our machine wind pressure is large and the air supply is long.
2. Stable performance and reliable quality: After 100mm, the “5090 evaporation rate network” has a strong cooling ability. It uses a three -lobe front -cut -type axis flow leaves with low noise and high efficiency.
3. Strong cooling effect: In the hot areas, the general cooling of the machine can reach the effect of 4-10 ° C, and the cooling cooling quickly
4. Energy-saving: Install one from 100-150 square meters, only 1 degree of electricity in 1 hour.
5. Power saving: Energy consumption is only 1/8 of the traditional air conditioner, and the investment is only 1/5 of the central air conditioner.
6. It can be used without environmental restrictions and open fire semi -open workshops.

Food processing plant cooling solution:
1. For food processing workshops with more personnel and equipment, the overall cooling solution:
The work of food processing plants is mostly in the form of “pipeline”. The entire workshop area is large and many personnel have caused the air to be turbid and sweltering in the workshop. In order to achieve good ventilation and cooling effects, the overall cooling scheme can be selected. Environmental protection air conditioner RDF-18A is used in densely personnel high-temperature workshops. The use area is 100 square meters. If the workshop area is large, it can also be used in combination. It can be calculated at 100 square meters.
2. For food processing plants that are less personnel and concentrate, job air delivery solutions are adopted:
In the case of large food processing workshop and fewer staff, generally use the position to cool down the job, only cool down the area of the personnel, and the area of the goods and products will not be cooled. It can also control the most reasonable range.

Food processing factory installation after installation effect:
After installing environmental protection air conditioners, the overall cooling can solve the problems of high temperature, water vapor, and air circulation of food processing workshops as a whole to help enterprises recruit workers and have a good production environment. Investment costs and obvious effects.