There are problems with the hardware factory:
1. The factory space is large. Generally, the steel structure of the hardware workshop is mostly. In the summer, the indoor temperature is higher than the outdoor temperature
2. It is scattered and the liquidity is very large. It is difficult to use traditional cooling equipment to cool down.
3. There are many large equipment and heat, and the direct temperature of the hardware workshop is left directly.
4. The hardware of the hardware workshop and heavy oil, there will be a lot of odor

The poor environment of the hardware factory has impact on the enterprise:
Due to the high temperature and hotness of the hardware factory, and the smell of dust, it will directly affect the physical health of the staff, lead to the loss of personnel and the difficulty of recruiting, and cannot complete the work tasks on time. Affect corporate reputation.

Hardware factory cooling solution, Xingke environmental protection air conditioner:
1. Strong cooling effect: In hot areas, the general cooling of the machine can reach the effect of 4-10 ° C, and the cooling is rapid.
2. The air volume is large, and the air supply is long: the maximum air volume per hour is 18000-60000m³, which can be selected according to customer requirements. Our machine wind pressure is large and the air supply is long.
3. Stable performance and reliable quality: After 100mm, the “5090 evaporation rate network” has a strong cooling capacity. It uses a three -lobe front -cut axial flow blades with low noise and high efficiency.
4. Energy-saving: Install one from 100-150 square meters, only 1 degree of electricity in 1 hour.
5. Power saving: Energy consumption is only 1/8 of the traditional air conditioner, and the investment is only 1/5 of the central air conditioner.
6. It can be used without environmental restrictions and open fire semi -open workshops.

Hardware factory cooling solution:
Because the hardware factory has a high temperature, a large amount of heating equipment, and oil pollution, it is recommended to use the overall cooling of Xingke environmental protection air -conditioning. The effect of ventilation and air cooling and cooling removal. In addition, the total cost of environmental protection air conditioners is 50%lower than that of the central air conditioner, 80%of power saving, and saving power than fans and exhaust fans.

Effect after installation:
After the hardware factory does the overall cooling, the temperature can be effectively controlled, such as high temperature, dust, and oil stains will be greatly reduced. The working environment is good. The physical health of employees will also be guaranteed. Essence