The problems existing in the toy factory:
1. The plastic odor is very large, and the workers must bring a mask at work
2. The staff is dense, so that the workshop is high temperature and sultry
3. Most plastic factories are concrete structures, with limited height and few doors and windows because the air does not circulate.

The poor environment of the toy factory has brought an impact on the enterprise:
Because there will be a lot of odor in toys, it will affect the health of employees. Now the post -90s requirements for the working environment are getting higher and higher, and the production environment is not good, which will directly affect the post -recruitment and retain people. Therefore, the improvement of the ventilation and cooling problem of toy workshop is imperative.

Toys factory cooling solution, select Xikoo evaporative air cooler:
1. The heavy air volume and the long-distance air supply: the maximum air volume per hour is 18000-60000m³, which can be selected according to the customer’s requirements. Our machine wind pressure is large and the air supply is long.
2. Stable performance and reliable quality: After 100mm, the “5090 evaporation rate network” has a strong cooling ability. It uses a three -lobe front -cut -type axis flow leaves with low noise and high efficiency.
3. Strong cooling effect: In the hot areas, the general cooling of the machine can reach the effect of 4-10 ° C, and the cooling cooling quickly
4. Energy-saving: Install one from 100-150 square meters, only 1 degree of electricity in 1 hour.
5. Power saving: Energy consumption is only 1/8 of the traditional air conditioner, and the investment is only 1/5 of the central air conditioner.
6. It can be used without environmental restrictions and open fire semi -open workshops.

Toys factory cooling solution:
For the problem of the odor, high temperature, and hot heat of the toy workshop, and the fixed work of the personnel, two types of toy factories are proposed to cool down solutions
1. Overall cooling
The overall cooling of environmental protection air-conditioning can quickly reduce the temperature of the toy workshop by 4 ° C-10 ° C, and replace the indoor air more than 1 minute in 1 minute. At the same time, it also ventilates dust removal and flavor. Standard configuration is equipped with 1 units per 100 square meters, 1.1kW power environmental protection air conditioners, 1 ℃ per hour
2. Turn on the job
A way of economy and practicality, cooling down the work area of the staff of toy factories, and adopting a direct hair dryer or pipeline, that is, solve the person’s cooling and control cost control.

The effect of the toy factory after installation:
These two toy factories cooling solutions can better help the toy workshop solve the problem of odor, high temperature, and stuffy heat, and the overall cooling effect is more obvious; if the job cooling, cooling the cooling of fixed job workers can also greatly reduce investment costs.