I believe that users who have learned about evaporative air cooler know that the biggest factor affecting the price difference of industrial water air cooler is the air volume. The cheapest model is the general-purpose 18,000 air volume industrial air cooler. In addition to 18,000, there are 23,000, 25,000, and 30,000 air volumes. , 40,000, 50,000 and larger air volume machines, the price of the air cooler will indeed vary due to the different air volume, the big the air volume, the higher the price of the host

Why is the higher the air volume of the air cooler host, the more expensive it is, because the greater the air volume, the higher its plasticity. To give a simple example, when we design an air cooler installation plan that requires ventilation and cooling, it is generally based on The volume of the cooling environment and the characteristics of the environment determine the number of units to be installed. The machine with a large air volume has a large air volume and a sufficient air pressure, and the air supply distance is longer. Therefore, when doing the supporting air duct project, it can be designed longer and with more air outlets. If the air volume is small, if you design too long air ducts and too many air outlets, it will directly affect the effect of cold air at the air outlets. In serious cases, the wind pressure at the end of the air ducts will be insufficient and there will be no cold air to blow. The advantage is very obvious. One machine can make longer air ducts and open more air outlets. Simply put, the effective cooling area of one machine is larger.

In addition, another advantage of the host with large air volume is that it saves the installation location. If it is said that in the same cooling environment, 10 hosts with 18,000 air volume are installed, and only 4 hosts with 30,000 air volume are installed. However, the user’s host installation location is limited. It can’t accommodate the installation of 10 hosts, especially some users’ environment is more special, the installation location is very limited, but the cooling area is very large, then we need to customize the industrial evaporative air cooler host with larger air volume at this time, the maximum can be If the main engine with 120,000 air volume is achieved, the main machine with large air volume will perfectly solve the problem of insufficient installation space at this time. Therefore, the air cooler with larger air volume has higher plasticity and more obvious advantages, but its production cost is lower. It is much higher than the main engine with small air volume, so the price of the air cooler with the larger air volume is also more expensive.