As the industrial air cooler is generally installed on the side wall or the roof or the ground of the outdoor workshop, it will be damaged by the sun, rain and wind and sand from the outside world. If it is not managed for a long time, If the installed enterprises can follow advice as below during the expiration of use, the performance of the machine will not be affected in the subsequent expiration of use.
- Regular cleaning and maintenance:
The specific cleaning and maintenance methods are as follows:
1.1. Cleaning method of environmental protection air conditioner sink:
Open the drain valve and clear with tap water; if there is a lot of dust or debris, you can take it out first, and then rinse with tap water.
1.2. Cleaning the cooling pad:
Take the cooling pad out and rinse it with tap water.Please note don’t use the water with too high pressure.
2. Keep the water supply system in good condition: Because the cooling of air cooler mainly relies on the physical phenomenon of water evaporation to take away the air heat, the core component of cooling is the water cooling pad. When the machine is running, the water will completely wet the surrounding of the machine. Four cooling pad are used for air cooling treatment. Only when the water quality is good, the blown air will be clean and cool without peculiar smell.
3. There is no pollution source near the installation location of the main unit of the air cooler, such as piled garbage and exhaust gas emissions, which will directly affect the air supply quality of the industrial air cooler, because the evaporative air cooler cools down by sucking the outdoor fresh hot air around the main unit into the machine cavity for cooling treatment.then bring the cool air to indoor. If the outdoor air itself has peculiar smell, or some chemical molecules that are harmful to human health, even if it is processed by the cooling pad in the environmental protection air cooler, it will not completely remove it. so be sure to keep no pollution sources near the installation location of the host equipment.
Post time: Jul-14-2022