XIKOO industry company has solved the problem of high temperature and stuffiness for nearly 5,000 users of various industrial sites in past 17years, and XIKOO has won unanimous praise from many users. Today XIKOO will tell you about the cooling system of a precision factory workshop.

According to feedback from XIKOO Engineering Manager , the precision factory workshop has the following problems:

1. The first floor of the standard factory building has an area of 65 meters length, 33 meters width, and a floor height of 4.8 meters. It has brick-concrete walls and a concrete roof.

2. In summer, the indoor temperature is relatively high to 38 -40°C.

3. People indoors are relatively scattered

4. Some equipment in the factory production workshop is generating heat.

If the customer wants to cool down the post/workstation, ensure that cold air blows to the workstation in the work area, and the air outlet temperature must be lower than 25°C.

After engineers surveyed the site, based on the area of the factory and workshop, customer needs, and considering the long-term use plan of the factory and workshop, a reasonable cooling plan for the factory and workshop was designed. Finally, 5 industrial power-saving air conditioners SYL-GD-30, which is an water cooled power-saving air conditioner is used as a cooling equipment for the cooling engineering solution of Jiangmen Heshan Seiko Workshop, and the customers are very satisfied with the cooling effect achieved.

Xikoo Industrial Energy-Saving Air Conditioner SYL-GD-30 is divided into an indoor unit and an outdoor unit. The main unit is responsible for cooling and air supply, so it is placed indoors; the outdoor unit is responsible for heat dissipation and water pipe connection, and is placed outdoors. In order to enhance the beauty of the workshop and avoid obstacles, each host is installed at the corner, and pipe air supply is used to cool down the workplace.

Due to the limited area of the factory building, a 30-meter air supply duct and 8 jet air outlets were used to solve this cooling problem.

The final result is that when the outdoor temperature is 35 degrees in the summer, the overall temperature of the precision workshop is around 30 degrees, and each work station is equipped with an air outlet, and the temperature of the air outlet is 20-22 degrees. In case of hot and muggy weather, for example, when the outdoor temperature is 38-40 degrees, the overall temperature in the factory workshop can still be controlled at around 30 degrees, and the ambient temperature of the workplace can also be controlled at 26-28 degrees. 26-28 is The human body senses the most comfortable temperature. If employees’ working environment and physical and mental comfort are achieved, work efficiency will be greatly improved, which can solve the problem of production progress of enterprises during peak seasons.